spiling boat plank
A spiling batten traditionally is used to record the shape of the bottom edge of each new plank at the moulds. the batten is then used to transfer this shape to the planking stock. when it comes to replacing an old plank or panel the most obvious way is to copy it by simply tracing around the old one.. Wooden boat school brooklin me. instructor greg rossel teaching how to spile a carvel plank. wooden boat classroom - spiling boat buddy. wooden boat building - scarfing boat planks with a. He is tracing around the spiling batten which we had fabricated to lift the plank shape from the boat: this photo shows just how severe the shape of the plank appears when laid out on the flat. but after being bent around the complex shape of the hull, everything looks normal. in the photo, the end closest to the camera is the bow end of the plank.. 
spiling boat plank Spiling one of the mid-ship planks on the 2nd strake below sheer plank tried to keep enough clamps on both sides to keep from shuffling clamps port to stbd. fitting complete, bedding compound applied. pilot holes drilled, clamped and ready to drive the 3″ #24 galvanized screws.. A common application of spiling in boatbuilding is in the fitting of a boat plank perfectly between two other previously installed planks. we begin by tacking in place a thin piece of wood (the spiling batten) in the opening between the planks..
