iceboat plank
Iceboat refurbishment building a new plank building a trailer runner alignment runner sharpening official dn webpage ice cleats and mittens links: jim wood's jig for building planks for the dn with proper camber while the jig is designed for an 8 foot plank, it will handle a 10 foot plank also.. A very interesting boat showed up here at iceboat central last month in desperate need of a new plank. she came down from nova scotia, and in classic novi style the plank was made with maple and birch. not that there's anything wrong with that: h.m.s. bounty, built in lunenberg in 1962 for the movie,…. After a plank is shaped, you can cover it in fiberglass cloth for protection. here is how it is wrapped (thank ron sherry for this method): 1) wrap the middle 4 feet of the plank, overlapping about 4″ on the bottom. 2) wrap the whole plank, overlapping about 4″ on the bottom again. note: use 6oz or 8oz glass cloth (cheap is good).. 
iceboat plank The dn (detroit news) iceboat sail area: 60 sq. feet length: 12 feet hull width: 21 inches mast length: 16 feet runner plank length: 8 feet number of runners: 3 (1 front steering runner, 2 side runners) hull material: wood typical weight: 100-150 lbs. maximum speed: 60 mph typical performance: 2-4 times wind speed. Yankee iceboat “stinger” located in southampton, ny (eastern long island) one of two “bite me” boats (when hiked bite me is visible on the bottom of the boat in all caps) meticulously restored by keith kennedy of nj. this is one of the nicest looking yankees you will ever see, everything is in excellent condition. 23ft mast, 18ft plank.
