varnishing timber
Varnish is a clear transparent hard protective finish or film. varnish has little or no color and has no added pigment as opposed to paint or wood stain which contains pigment. however, some varnish products are marketed as a combined stain and varnish. varnish is primarily used in wood finishing applications where the natural tones and grains in the wood are intended to be visible.. 1. totalboat gleam marine spar varnish. it is arguably the best varnish for wood that you can shop for, especially if you are a sailor. this formula is a certified marine grade varnish with uv inhibitors, phenolic resins as well as tung oil.. Here's the basics to varnishing wood on a boat: complete prep work: remove old varnish by sanding, rinse down your boat and tape off your area. use a badger-hair brush when varnishing. apply a thin first coat, and keep a wet edge. keep your strokes long and light, brushing from dry back to the wet edge.. 
varnishing timber Steps to sanding & varnishing wood. varnish is a clear finish that hardens and cures on the surface of wood. by way of contrast, penetrating oils don't remain on the surface, and neither lacquer. If you apply varnish as the heat of the day is building, ie. from after lunch to mid-afternoon, air trapped in the timber can expand and give rise to small air bubbles in the varnish surface. by applying the varnish as the temperature is dropping the cooling of the timber will draw the varnish into the timber, giving better sealing..
