painting boat hull on trailer
Raising boat of the trailer for bottom painting. using car jack and 4 feet beam supports. home made cradles and many 2x6.. There are instances where the bottom painting isn’t necessary. if your boat is typically stored in a dry storage facility or on a trailer and only hits the water for a short time, you can opt not to paint. in these cases, your boat hull can be properly maintained with a heavy coat of wax and periodic cleanings. for most other boats that are docked in the water or see heavy off land use. I’ve done a few boat bottoms and it’s best to pull the trailer out from under the boat and it’s not hard, i use cylinder blocks and small pieces of wood to put on top of the blocks and you can do a much better job on your hull. when you finish and the paint is cured and put the trailer back under the hull and touch up the places where the. 
painting boat hull on trailer Remove the boat from the water. you must paint the boat in the air. you can get the boat out of the water by using an aeroplane wing. back the trailer down to the water via a boat ramp. have someone on the boat gently ease the boat onto the trailer using a light pressure on the throttle.. If you need to buy reliable and premium quality paint in painting aluminum boat hull, this product is worth a try. as for ease and convenience of use, fast-drying ability and permanent camouflage paint color, this is the best bang for the money..
